The evolution of cutting technology and metal-cutting machines in the paradigm of technological modes
https://doi.org/10.22394/2410-132X.481
Abstract
The article examines, from a historically foreseeable perspective, the technological methods of cutting and metal-cutting machines based on available literature. It summarizes and systematizes the directions and achievements of scientific research on cutting theory, as well as the creation of machine tools and their level of perfection. The goal of the study is to demonstrate, through the evidence from metal cutting machines, the significance and effectiveness of changes in economic development in relation to the technological mode. Using systems analysis, the level of development can be assessed based on the normative value of resource efficiency, which measures how well technology indicators are achieved through the design of machines and technological equipment. Factors that influence the formation of these indicators depend on technical and technological conditions and aim to achieve maximum values based on the technological capabilities for their implementation in industry and economy.
About the Author
A. P. Kuznetsov
Bauman Moscow State Technical University (National Research
University)
Russian Federation
Russian Federation
Alexander P. Kuznetsov – Doctor of Technical Sciences, Professor, Professor of the Department of Machine tools, Faculty of Mechanical Engineering Technologies
5, building 1, 2nd Baumanskaya str., Moscow, 105005
References
1. Akayev, A.A. (2012). Mathematically based empiric-cyclic theories, and climatological developments Schumpeter-Kondratyeva. In Kondratiev Waves: Aspects and Prospects: Yearbook / Rev. red. A. A. Akayev, R. S. Greenberg, L. Well. Grinin, A. V. Korotayev, S. Yu. Malkov. Volgograd: Uchitel, 314–341. (in Russ)
2. Ashby, M.F. (2005). Materials selection in mechanical design. Oxford: Pergamon Press.
3. Attia, H., Sadek, A., Altintas, Y., et al. (2024). Physics based models for characterization of machining performance – A critical review. CIRP Journal of Manufacturing Science and Technology, 51,161–189. https://doi.org/10.1016/j.cirpj.2024.04.008
4. Carlson, Bo (1983). The Development and Use of Machine Tools in Historical Perspective, IUI Working Paper, 97. Research Institute of Industrial Economics, Stockholm
5. Chelyustkin, A.N. (1933). Theory of cutting. Moscow: Gosmashmetizdat. (in Russ)
6. Development of the science of metal cutting / Ed. N. N. Zorev. Moscow: Mechanical Engineering (1967). (in Russ)
7. Dornfeld, D., Lee, D-E. (2008). Precision Manufacturing. New York: Springer https://doi.org/10.1007/978-0-387-68208-2
8. Glazev, S.Yu., Aivazov, A.E., Belikov, V.A. (2019). Cyclical – wave theories of economic development and prospects of the world economy. Is the medium-term and long-term development of the world economy predictable? Scientific Works оf The Free economic Society of Russia, 219, 177–211. (in Russ)
9. Glazev, S.Yu., L’vov, D. S., Fetisov, G.G. (1992). Evolution of technical and economic systems: possibilities and limits of centralized regulation. Moscow: Nauka. (in Russ)
10. Grzesik, W. (2017). Advanced Machining Processes of Metallic Materials. Theory, Modelling, and Applications, Elsevier B. V.
11. Kalpakjian, S., Schmid, S.R. (2009). Manufacturing engineering and technology. Prentice Hall.
12. Kuznetsov, A.P. (2015). Structure of cutting processes and equipment. Part 1. Energy-information model of the structure of machining processes. Journal of Mechanical Engineering, 2, 73–83. (in Russ)
13. Kuznetsov, A.P., Koriath, H.J. (2017). A new systematic approach to the description of processes and their classification. 14th Global Conference on Sustainable Manufacturing, GCSM 3–5 October 2016, Stellenbosch, South Africa. Procedia Manufacturing, 8, 199–206. https://doi.org/10.1016/j. promfg.2017.02.025
14. Kuznetsov, A.P., Koriath, H.J. (2019). Energy – information regularities of increasing productivity in metalworking machine tools. IV International Conference “Modeling of Nonlinear Processes and Systems”, MNPS-2019. EPJ Web of Conferences, 224, 1–8. https://doi.org/10.1051/epjconf/201922405008
15. Kuznetsov, A.P. (2015). Structures of processes and equipment for cutting processing. Part 3. Energy informational model of structure of manufacturing processes. Journal of Mechanical Engineering, 4, 76–87. (in Russ)
16. Kuznetsov, A.P. (2021). Tendencies in the development and efficient production of machine tools. Part 2. Energy information model. Stankoinstrument, 3, 30–43. https://doi.org/10.22184/2499– 9407.2021.24.3.30.43 (in Russ)
17. Kuznetsov, A.P. (2024). Technological sovereignty in factories. Space and development. Stankoinstrument, 2, 4–55. https://doi.org/10.22184/2499–9407.2024.35.2.34.55 (in Russ)
18. Malyshev, V.I. (2011). Essays on the history of the science of cutting materials. Tolyatti: TGI (in Russ)
19. McNei, Ian. (1990). An Encyclopedia of the History of Technology. London: Taylor & Francis.
20. Parton, V.Z. (1990). Mechanics of destruction: from theories to practices. Moscow: Nauka. (in Russ)
21. Putz, M., Koriath, H.-J., Kuznetsov, A.P. (2019). Resource consumption classes of machine tools. Special Issue. HSM 2019 15th International Conference on High Speed Machining October 8–9, 2019, Prague, Czech Republic. MM Science Journal,3301–3309. https://doi.org/10.17973/MMSJ.2019_11_2019085
22. Smil, V. (2023). From microorganism to megalopolis. You asked for a compromise between progress and Budweiser planetary. Moscow: Eksmo. (in Russ)
23. Sukharev, O.S. (2024). “Economics of technology” as a direction of science: retrospective and perspective. Economics of Science, 10(1), 41–53. https://doi.org/10.22394/2410–132X-2024-10-1-41-53 (in Russ)
24. Sukharev, O.S. (2024). Measuring Technological Development: Problems and Ways to Overcome Them. Stankoinstrument, 3, 26–55. https://doi.org/10.22184/2499–9407.2024.36.3.26.32 (in Russ)
25. Zagorsky, F.N. (1960). Essays on the history of metal-cutting machines. Moscow: Publishing House of the USSR Academy of Sciences. (in Russ)
26. Zhang, C., Yang, J. (2020). A History of Mechanical Engineering. Singapore: Springer. https://doi.org/10.1007/978-981-15-0833-2
27. Zvorykin, A.A., Osmova, N.I., Chernyshev, V.I., Shukhardin, S. V. History of technology. Moscow: Sotsekgiz. (in Russ).
Review
For citations:
Kuznetsov A.P. The evolution of cutting technology and metal-cutting machines in the paradigm of technological modes. Economics of Science. 2024;10(4):75-99. (In Russ.) https://doi.org/10.22394/2410-132X.481
Views:
175
Email this article 